|
*
Grained Single & Two Sided (6, 8, 12 Gauge)
- Paramount
*
Optima CTP
- Mitsubishi Alpha Violet
* Deletion & Addition Pens,
* Chemistries
*
Supply Index Page *
| GraphLine G1S
& G2S Metal Plates |
 |
|
|
|
GRAPHLINE PRESSROOM PRODUCTS
Metal plates |
|
|
|
G1S: ONE SIDED GRAINED PLATES |
|
G1S is a single sided grained and anodized plate.
When exposed and processed |
|
to our recommendations,
they have a run length of over
200,000 impressions. |
|
.0055 gauge |
|
.008 gauge |
|
.012 gauge |
|
|
|
G2S: TWO SIDED GRAINED PLATES |
|
G2S is a double sided grained and anodized plate.
When exposed and processed |
|
to our recommendations,
they have a run length of over
200,000 impressions. |
|
.0055 gauge |
|
.008 gauge |
|
.012 gauge |
|
|
|
* Run lengths are subject to press conditions |
|
|
|
|
|
CHEMISTRY FOR METAL PLATES |
| |
|
GraphLine Aqueous Metal Plate Negative Developer |
|
|
|
Use when immediate plate processing & printing are
intended for either manual |
|
or automatic processing. Plates must
be gummed with GraphLine plate gum if |
|
not used immediately. Recommended
for use on all negative or subtractive plates. |
|
GraphLine Aqueous Metal Plate Gum/Finisher |
|
To
inhibit oxidation,
use GraphLine Aqueous
Metal Plate Gum/Finisher if plate is |
|
|
|
to be stored for any
amount of time. |
|
GraphLine Aqueous Metal Plate 2-in-1 Developer |
|
|
|
This product develops and gums the plate in one easy
step, facilitating restarts. |
|
GraphLine Universal Fountain Solution |
|
|
|
Non-glycerin alcohol base provides complete transfer of
ink with minimum water |
|
absorption. Use with rubber and oil-based ink for
brilliant color reproduction |
|
and dark, dense blacks. |
|
|
|
PLATE FINISHING CHEMICALS |
|
|
|
GraphLine Plate Cleaner/Scratch Remover |
|
Specially formulated for the GraphLine Aqueous Metal
Plates. It provides excellent |
|
protection against many pressroom variables. Prevents
even the deepest scratches |
|
from taking ink and insures quick ink removal. This
formula desensitizes the plate |
|
and leaves a thin water receptive coating on the
non-image area. Plates are free of |
|
scratches and scum and will be protected from oxidation. |
|
|
|
|
|
GraphLine Metal Plate Cleaner, Preserver, and Finisher |
|
o
Gentle on Plates |
|
o
Good desensitizing qualities |
|
o
Compatible with most metal plates |
|
o
Keeps non-image area water receptive |
|
o
Use as overnight or short term storage |
|
o
Use to clean and remove ink from plates, and/or stores
plates |
|
SYSTEM
CLEANER |
|
|
|
o
Is designed to
penetrate and lift
residue and stains from the |
|
surface to be cleaned & remove chemical build-up in
processor. |
|
o
Recommended for Rapid Access, Litho and RC
processors,
|
|
stabilization, imagesetting, plate
processors and is effective in |
|
tanks and
trays. |
|
o
1
to 1 Dilution (1 qt. system cleaner to 1 gal. water). |
| Paramount
Metal Plates |
|
|
PARAMOUNT PLATES |
|
S1:
ONE SIDED GRAINED PLATES
Paramount S1
is a single sided grained and anodized working plate.
When
exposed and processed to our recommendations,
they have a run
length up to
75,000
impressions.* Paramount S1 provides quick roll up
and excellent
image quality.
Resolution to 200 lpi with screens of 2-98%. |
|
.0055 gauge
.008 gauge
.012 gauge |
|
|
|
S2:
TWO SIDED GRAINED PLATES
Paramount S2
is a two sided grained and anodized negative working plate.
It
is a medium run plate with very fast rollup and
produces exceptional image
sharpness and print stability. |
|
.0055 gauge
.008 gauge
.012 gauge |
|
|
|
* Run lengths are subject to press conditions |
|
PARAMOUNT CHEMISTRY FOR METAL PLATES |
| |
|
GraphLine Paramount Aqueous Metal Plate Negative Developer |
|
|
|
Use when immediate plate processing & printing are
intended for either manual |
|
or automatic processing. Plates must
be gummed with GraphLine plate gum if |
|
not used immediately. Recommended
for use on all negative or subtractive plates. |
|
GraphLine Paramount Aqueous Metal Plate Gum/Finisher |
|
To
inhibit oxidation,
use GraphLine
Paramount Aqueous Metal Plate Gum/Finisher |
|
|
|
if plate is to be stored for any
amount of time. |
|
GraphLine Paramount Aqueous Metal Plate 2-in-1 Developer |
|
|
|
This product develops and gums the plate in one easy
step, facilitating restarts. |
|
GraphLine Metal Plate Cleaner, Preserver, and Finisher |
|
o
Gentle on Plates |
|
o
Good desensitizing qualities |
|
o
Compatible with most metal plates |
|
o
Keeps non-image area water receptive |
|
o
Use as overnight or short term storage |
|
o
Use to clean and remove ink from plates, and/or stores
plates |
|
|
|
Deletion &
Addition Pens |
|
GraphLine Metal Plate Deletion Pen |
|
For making corrections to the GraphLine Grained Metal
Plates. It is
recommended that the user review and follow the
directions to achieve optimal
results. |
|
|
|
Offset Hole Plate Punches |
|
|
|
All punches work for paper and polyester plates and can punch
wider plates due to
an
extended pin. |
|
PRINTING PLATE PRODUCTS |
|
Mitsubishi
Alpha Violet L Plates |
|
Alpha Violet Plates are single sided anodized aluminum
plates. When exposed
and processed to our recommendations, they have a run
length of over 200,000
impressions. |
|
.006 gauge
.008 gauge
.012 gauge |
|
|
|
|
|
Direct to Plate Chemicals |
|
Ready to Use Chemicals |
|
SDP ALPHA Developer
- Stabilizer - Gum - OH
- Deletion Pens
Violet Plate Cleaner - OA Solution -
Eco Developer |
|
|
|
|
| Optima
Violet
Photopolymer Plates |
|
|
Optima Violet
Photopolymer CTP Plate |
|
|
|
Optima Violet Photopolymer Plates are
negative working, electrochemically
grained high-speed laser plates for use on Violet CTP
devices. They deliver
dramatic results and predictable, consistent press
performance. Optima Violet
Plates offer the value needed to achieve fast results,
quality imaging and
premium performance even during the longest press runs.
High quality with
resolutions of up to 200 lpi.
|
|
.008 gauge
.012 gauge |
|
|
|
Optima Violet Polymer Chemistry |
|
|
|
Gum |
|
For use with standard gumming
applications. |
|
Developer/Developer Replenisher |
|
Ready to use chemistry with an
operating temperature of 82 degrees F. For
use
also as replenisher when tank is being topped off. |
|
Deletion Fluid |
|
For area dependent replenisher.
Ready to use. |
|
|
|
|
|
